Heavy Duty Stationary Diesel Engine Oils are blended from selected base oils and a combination of additives to offer a superior performance. These oils have excellent oxidation and chemical stability needed for high temperature operation. These are dispersant /detergent oils that help clean the engine and keep the insolubles in suspension while functioning as a lubricant. They also have the necessary reserve alkalinity to withstand the corrosive effects of acids formed during combustion to the fuel. It is blended to meet MILL 2104A specification.

MS Refrigeration Oils are manufactured from specially selected base oils that possess low temperature fluidity and good chemical stability. These oils have inherent oxidation resistant characteristic and high dielectrics strength needed by sealed units of air conditioners and refrigerators.

MS Synthetic Hydraulic Oil is designed to give maximum protection in both mobile and stationary hydraulic equipment in industrial applications, as well as in environmentally sensitive areas. M S Synthetic Hydraulic Oil is formulated with synthetic base stock and an ash less, zinc-free additive system that provides exceptional oxidationstability, water separability, foam suppression, and protection against wear, rust and corrosion. M S Synthetic Hydraulic Oils is designed to meet or exceed the performance requirements of conventional antiwear hydraulic oils, especially in severe, high-output applications.

MS Synthetic Gear Oils MS Synthetic Industrial Gear Oils are designed to give maximum protection, and are formulated with synthetic base and protection against wear, rust and corrosion. These lubricants reduce power consumption and makes them energy efficient gear oils. They provide long equipment life. MS Synthetic industrial Gear Oils are lubricants having inherent high viscosity index and excellent thermal and oxidation stability. MS Synthetic industrial Gear and bearing oils designed to provide outstanding performance in extreme service applications at high and low temperatures.

MS Heat Transfer Oils are manufactured from highly paraffin base oils having high viscosity index. These base stocks with exceptional oxidation stability have been found ideal for blending of heat transfer oils. These have high thermal conductivity and adequate specific heat to offer effective heat transfer. MS Heat Transfer Light is a low viscosity heat transfer oil that is suitable for use in pressurized heat transfer systems. MS Heat Transfer 550 has the correct viscosity for obtaining optimum heat transfer rates from well designed systems. It also functions as a lubricant for the circulating pumps.

MS Circulating Oil AW grades are blends of high Viscosity Index chemically stable base oils, and specially selected anti wear, anti-oxidation, antitrust and anti-foam additives. These oils have good demulsibility characteristics. They meet the requirements of very high pressure hydraulic systems (1000 psi and above) and also of systems where high speed actuations are desired. These can also be used in enclosed gear boxes, compressors, chain drives, machine tools, circulation oiling systems, etc.

MS Turbine Oils are premium quality Turbine Oils which are used as initial fill and for top-up of lubrication systems of steam, gas and hydraulic turbines for obtaining reliable service.

Our Loom Oils comprise a range of lubricants which have been specifically designed for all loss systems of textile looms. Their wide range enables the user to select the correct grade as per his requirements. These are user friendly in as much as the grades have been formulated to perform well, both for boundary as well as dynamic lubrication conditions.

MS Industrial gear oils are quality oils fortified with extreme pressure additives, antifoam, antirust, and antioxidation agents. These oils are recommended for all heavy duty enclosed gear drives with circulation or splash lubrication system operating under heavy or shock load conditions, pain and antifriction bearing subjected to shock and heavy loads. They have excellent oxidation resistance and thermal stability.

A very important segment of the metal working industry is metal forming. In this process the metal, instead of being cut or machined, is forced drawn to acquire the desired dimensions by the use of the suitable mechanical equipment. Metal forming process includes operations like pressing, stamping, deep drawing, wire drawing, tube drawing and forging. During these operations considerable amount of heat and stress are generated. MS grades are tailor made to satisfy the various requirements included in metal drawing / forging operations.

It is a stable, non-staining, mineral oils blended with fatty oils to improve wetting characteristics. It has good cooling ability and is recommended for use in Aluminium wire drawing operation.

It is non-staining, water-soluble cream coloured paste for "dry on" or emulsion application. It is manufactured with specially balanced mixture of soap and fat. It is especially suitable for use as an effective coolant in wire drawing operations. The recommended dilution ratio with water is between 1 to 5 % depending upon the gauge of wire to be drawn. It is also found useful in deep drawing of automotive bodies and metal sheets.

Glass mould release oils which does not leave any residue on the glass even at high operating temperatures, Can be used in certain types of ceramic industry.Mould Lubricant Used For Preparation Of All Types Of Glass Articles. Application Can Be Done By Mechanical and Automatic Spraying.

With an aim to stand tall on the expectations of our patrons, we are engaged in trading, wholesaling and supplying quality assured Cable Oil. We source the offered cable oil from the most reliable vendors of the industry who process these by using premium quality ingredients that are quality checked before usage. After the completion of the processing process, our vendors check these cable oil so as to ensure that these are in-sync with the globally laid quality standards.

• High resistance against oxidation
• High viscosity index
• Thermal stability

MS Lubricants are manufactured from selected base oils which change less in terms of viscosity with temperature. These oils are fortified with additives to offer long service. However during their selection, care has been taken to ensure non clogging of sintered bush bearings.

• Blended from highly refined base stocks, anti-wear additives, rust and corrosion inhibitors, and foam suppressants. 
• it is non-toxic, colourless, and odourless. 
• Recommended for use as general-purpose sewing machine oil. 

MS Gear Box & Bearing Lubricants are formulated to give full fluid film conditions when used for the lubrication of bearings and gears. These are not compounded with fixed oils or soaps.

MS Bearing grades 252-472-692 are premium quality heavy duty bearing and circulating oil. They have high viscosity index with superior oxidation and thermal stability. They meet the requirement of high demulsibility, low foaming, excellent rust protection and good film strength property. The quality of the oils is further enhanced by the presence of selected grades of anti – oxidants, anti – rust, demulsifier and defoamants.

MS Lub Oils comprise specially selected mineral oils with ISO viscosity grades ranging from 10 cSt to 220 cSt at 40° C. These are also used by the industry for once-through all-loss lubrication systems. These are invariably used in enclosed systems where the use of high grade products is not desired because of copious leakage from oil seals and the consequent heavy make-up.

MS Way Oils are blended from high quality base oils used for hydraulic oils and fortified with anti-wear,anti-rust and tackiness additives required in way-lubricants. These oils would perform the function of a hydraulic fluid in non-critical systems and at the same time give the necessary stick-slip characteristics required of a way-oil under moderate load conditions.

MS Open Gear & Wire Rope Lubricants are bituminous compounds blended to the right viscosity to provide the necessary film strength and adhesiveness. These products are viscous enough to give an unruptured film and yet sufficiently free flowing to offer adequate heat dissipation. For Wire Rope Lubrication, both a lubricant and a rust preventive are often needed. In such instances Open Gear Lubricants are used, since these bituminous compounds offer excellent protection in case of heavily loaded situations. Whilst MS Gear Compound 1000 can be applied neat.

MS HLP Circulating Oils are of the antiwear type having extreme pressure characteristics. These are blended from specially selected high viscosity index base-oils with additives to obtain the required anti-wear characteristics. These oils are also fortified with rust and oxidation inhibitors. They also have excellent good demulsibility and anti-foam characteristics.

MS Steam Cylinder Oils are highly refined oils having good chemical and thermal stability and low deposit forming tendency at elevated temperatures. These oils have excellent film strength and oiliness characteristics and provide low friction and good sealing properties.

lubricants used in vacuum pumps need to be extremely reliable as vacuum pumps usually operate as a vital part within another process. They need to give very long service intervals so as not to disrupt overall production. Vacuum Pump oils require special properties to work correctly in high vacuums pumps and to ensure that there is no breakdown of the lubricant itself. They need to be chemically stable, non combustible and be resistant to pressure, vacuum and sometimes radiation.

• Outstanding protection against wears, even in critical high-pressure applications.
• Excellent oxidative and chemical stability, resulting in extended service life.
• Outstanding demulsibility, ensuring rapid separation from water and moisture.
• Pass critical filterability tests and offer outstanding protection against scouring and scuffing.
• Represent a family of clean oils.

Good defoamant properties ensure smooth operation of hydraulic pumps with minimum possibility of problems due to cavitations

Spindle Oils have been developed to meet the requirements of high speed spindles of machine tools, plain and anti friction bearings of textile spindles and other hydraulic applications of precision machines where a very light bodied oil is needed.

MS compressor oil is premium quality lubricant designed for using in reciprocating compressors. This oil is recommended for the crankcase of all kinds of compressors.

Metro compressor oil is blended from narrow-cut paraffinic base oils, with selected high temperature antioxidants and rust inhibitors to give low carbon-forming tendencies in air compressors.

Metro Arornatic Oil 710 is premium qualify low aniline and high flash point lube oil. It is specially recommended for natural rubber, polybutadine rubber and SBR.

Metro Naphthenic 552-572 oiL are a superior quality lube oils specially developed with a high viscosity and high flash point. It is specially developed for manufacturing wide range of Rubber products, taking care of finished products.

Metro Paraffinic oils are of premium quality oils, with excellent processing properties and high heat resistance which insures manufacturing of critical products in rubber industries

MS SP Hydraulic Oils provide good film strength, anti-wear properties to minimize wear in pumps, rings, valves, pistons. These oils have high viscosity index to restrict any viscosity change under continuous operating conditions and resistance to foaming to ensure efficient functioning.

These oils are recommended for use in hydraulic systems, compressors, pumps, circulation oiling systems, enclosed gearboxes etc.

These products are mobile liquids consisting of thin film forming ingredients, rust inhibitors and water displacing additives in solvents and best quality mineral oils. On evaporation of solvent, thin soft film is obtained.

The water-displacing additives displace all the traces of moisture on the coated components, leaving a protective film of these products.

MS-172 is used on a wide range of items and also on interior surfaces where elaborate protection is unnecessary and in certain cases for the interim protection of assemblies.

MS-252 is premium rust preventive and is specially designed as a protective for all types of bearings and tools. Its superior characteristics protect the components for extended durations. It can be used for dual purpose – for inter process treatments as well as for application on the protection parts at the final package stage. For final application the product can be used as such, whereas it can be diluted with mineral turpentine for inter process treatments to cut down the costs.

These products can be applied by spray OR cold dip method.

MS Cut 152 is a superior quality neat cutting oil developed for general duty machining operations. This product is blended from high viscosity index base stocks and contain chlorinated fatty material, which provide distinct advantages to the use of this oil.

MSCut 152 is recommended for a variety of machining operations on both ferrous and non-ferrous metals. It is also suitable for automatic and multi-tool lathes handling high tensile steels. It can be used for such specialsed applications as thread-grinding, form-grinding and milling set-ups using multiple cutters. The use of this cutting oil provides improved machinability without the risk of discolouration of components and avoids premature regrinding of cutting tools.

These oils are unlikely to present any significant health or safety hazard when properly used in the recommended application and good standards of industrial and personal hygiene are maintained.

• Can be used for both ferrous & non-ferrous metals
• Has EP properties which improve maintainability and prevent the risk of discolouration of components
• Can be used for variety of cutting operation
• Is also suitable for machine tool lubrication

MSCut 945 are active type neat cutting oils and contains higher dosage of sulphurised fats. These oils contain a sulphurised fatty material, which improves oiliness property thus providing better surface finish.

MSCut 945 are recommended for most of the cutting operations on ferrous metals under severe operating conditions, which demand high degree of chemical activity in oils. This oil is suitable for machining operations on high tensile stainless steel as well as Ni-Cr alloys by automatics, gear cutting, hobbing, drilling, reaming and thread cutting machines. To obtain best results with the use of this product, it is necessary that a copious flow of oil at low pressure is maintained at the cutting area.The use of MSCut 945 for cutting peration on non-ferrous metals and its contact with soft metal bushes in machines should be avoided.

• Provide continuous protection to tool edges over a wide range of operating temperatures
• Help improving surface finish due to the added oiliness property
• Enable machining of tough, ductile steels in severe operations
• Prevent localized welding between the chip and tool
• Keep at minimum, oil drag-out losses on components and swarf

The use of MSCut 945 for cutting operation on non-ferrous metals and its contact with soft metal bushes in machines should be avoided.

MS-CUT-BR is a special purpose neat cutting oil of non-corrosive type, developed for flute grinding of drills and various other critical form grinding operations. MS-CUT-BR possesses very high oiliness characteristic due to the presence of carefully selected fatty material. Excellent foam release property is imparted to the oil by incorporation of a defoamant.

MS-CUT-BR is recommended for flute grinding of drills, reamers and various other form grinding tools, which involve sever type metal grinding processes. This product is also suitable for gear cutting, hobbing and high speed metal working operations on automatics. MS-CUT-BR can be used both for ferrous as well as non-ferrous metals, since it is not corrosive in nature.

• Prevents overheating of work-piece/grinding wheel thus helps in production of components to correct dimensional accuracies.
• Ensures improved surface finish.
• Has high oiliness property, which helps in heavy duty machining.
• Can be used for machining both ferrous and non-ferrous metals.
• Prevents foaming.

To prevent safety and health hazards, this neat cutting oil should be used as per the recommended application and guidelines of industrial and personal hygiene must be followed

MS quench 152 & MS quench 153 are low viscosity quenching oils of exceptionally high quality. These oils are suitable for heat treatment operations on metal components with demand- accelerated rate of quenching. These oils are blended from selected low sulphur base stocks having excellent oxidation stability, good thermal stability, high fluidity and low volatility.

MS quench 152 is recommended for general purpose fast quenching applications. It is recommended for hardening of many components, in automobile and light engineering industries. This product is particularly used for hardening of bolts, set screws, crankshafts, axles camshafts, steering arms and brake drums. MS quench 153 is recommended for accelerated quenching of a variety of steel components in major industries. It is particularly used for quenching of high-speed steel tools, bolts, nuts and ball bearings. MSquench 152-153 is also used for quenching of many components after carbonitriding.

• Provide accelerated rate of quenching
• Ensure cleanliness of quenching oil systems
• Have low drag-out on components thus reduce oil consumption
• Retain quenching power over extended periods, owing to minimum oil thickening and sludge forming tendency
• Assist in obtaining uniform hardness of metal components

These oils are unlikely to present any significant health or safety hazard when properly used in the recommended application and good standards of industrial and personal hygiene are maintained.

MSCut 251 is a low viscosity sulphur- chlorinated type cutting oil. Its selected additives impart marked antiweld properties, which helps machining of intricate shapes with high precision. Being a low viscosity product it has excellent cooling and quick swarf removal characteristics.

• Caters for more arduous machining of tough ferrous and ferrous alloys
• Gives high precision on long work cycle operations
• Provides effective flushing of fine swarf
• Ensures faster cooling of tool and work piece
• Has minimum rust forming tendency when us in high pressure coolant feed systems
• Has minimum misting tendency when use din high pressure coolant feed systems
• Assists in achieving high rate of production
• Has low sludging tendency to give optimum filter life
• Helps achieve longer tool life

MSCut 251 is recommended for deep hole boring and deep hole drilling of ferrous and ferrous alloys. It gives excellent finish, because of balanced combination of fat, chlorine and active sulphur, under continuous and long work cycle. It is also suitable for certain honing operations. This product is not recommended for machining of non-ferrous metals.

MS SYNTH products are water soluble synthetic grinding fluids. The solutions prepared from these fluids are fully clear and free from any oil or fatty matter. These products have remarkable anti rust property. MS Synth contains a special chemical inhibitor, which protects cuprous metal components of machines tools.

MS SYNTH is recommended for grinding of ferrous metals, high nickel and titanium alloys only. It is of a special value when grinding open grain cast irons, which tends to rust quickly after being machined. MSsynth is specially recommended for grinding operations of Iron- Steel, Non-alloyed Steels and Nickel Chromium Steels. It should not be used for grinding aluminium, zinc, copper or magnesium alloys, tin or cadmium coated parts.

• Gives longer service life to grinding wheels in between re-dressings.
• Produce good ground finish.
• Do not emanate obnoxious odour even when machine is shut down fluid is not kept in circulation.
• Are not attacked by bacteria.
• Have longer life and the solution maintains clarity throughout the service.
• Do not give skin irritation when used in proper dilution range.
• Have remarkable antirust properties.

MS Quench 16 & 19 oils are high quality oils developed for general purpose metal quenching operations. Theses oils are formulated from specially selected high viscosity index base stocks having good oxidation stability, good fluidity and low volatility. MS quenching oil is a straight mineral oil having normal quenching characteristics. MS 19 is incorporated with a polar additive, which imparts accelerated quenching property to the oil so as to meet certain specific end use requirements.

MSquench oils are used for all normal quenching operations on a wide variety of steel to impart the desired hardness to components without distortion. The special compounding agent incorporated in MSquench 19 improves the wetting ability of the oil, so that it provides faster initial cooling for optimum hardness, where as the base oil ensures slow cooling in the final stage for stress relief and distortion free results.

• Have good quenching characteristics
•  Have long service life due to excellent oxidation stability
•  Impart uniform hardness without distortion
•  Have a wide application range

These oils are unlikely to present any significant health or safety hazard when properly used in the recommended application and good standards of industrial and personal hygiene are maintained.

MSCut Clear is soluble cutting oil, which yields a translucent type emulsion in water. This product has been specifically developed to meet the engineering industry's demand of soluble cutting oil that offers the advantages of visibility of machining operations.

MScut Clear is recommended for multi-tool set-ups in profile grinding, where the translucent type emulsion enables cutting tools, jigs, fixtures and components to be seen during operations. This product, thus offers better scope for manufacturing components to the correct dimensional tolerances. Stable and long lasting emulsion of MScut Clear can be formed by adding oil to water and not vice versa. In order to have homogeneous and complete dispersion of oil in water, continuous stirring is necessary while preparing the emulsion. MScut Clear should be used in the concentration of 3% for most of the machining operation, whereas more dilute emulsion would meet the requirements of grinding operations.

These oils are unlikely to present any significant health or safety hazard when properly used in the recommended application and good standards of industrial and personal hygiene are maintained.

MSCut 53 is a non-staining neat cutting oil. This oil has been specially developed for those engineering industries which are involved in carrying out a large number of repetitive machining operations of less severe nature. MSCut 53 is blended from high viscosity index base oils and fatty material, which impart free flowing and good heat dissipation properties to the oils. The product also contains a deodorant.

MSCut 53 is an excellent metal working oil, particularly for machining operations on automatics, where intense heat is generated at work- piece/tool interface, due to high spindle speeds and short cycle time. It is necessary to dissipate this frictional heat, as quickly as possible, so that fuming of oil or distortion of metal component is avoided. MSCut 53 is non-staining and hence it can be used while machining copper brass, or alloys containing zinc. It is also suitable for operations on free cutting and mild steels, particularly on screw automatics, capstan or turret lathes.

These oils are unlikely to present any significant health or safety hazard when properly used in the recommended application and good standards of industrial and personal hygiene are maintained.

MSCut 351 and 353 are chlorinated inactive type cutting oils containing additives to impart oiliness and EP properties. Chlorine and non-corrosive sulphurised fat is incorporated to provide anti-weld, extreme pressure and oiliness characteristics to these oils and hence these grades give excellent performance over a wide range of temperatures.

All machining operations on non-ferrous metals. Machining of ferrous metals where the severity of operation is not high. Addition of chlorine enables the use of these oils for extreme pressure – low/moderate temperature cutting operations where feed rates are high but speeds are low.

• Minimize welding of the chip to the cutting tool
• Help retain sharpness of the cutting edge and reduce stress at the cutting point
• Reduce friction between chip and tool face thus generate less heat
• Do not stain non-ferrous metals
• Can be used as a hydraulic and general purpose lubricating oil in case cross leakages occur 

These oils are unlikely to present any significant health or safety hazard when properly used in the recommended application and good standards of industrial and personal hygiene are maintained.

MS-Cut-S is a soluble type high quality cutting & Lubricating oil which yields rich milky emulsion with water. Special emulsifier is incorporated to ensure its complete dispersion in water. The emulsion formed is homogeneous and stable in nature, and does not split during usage or routine machine shut down periods, under normal conditions.

• Superior cooling and lubricating properties aid to ensure excellent surface finish and minimum tool wear.
• Contributes towards long grinding wheel life and minimizing wheel loading if used as grinding coolant.
• Provides long lasting stable emulsions.
• Protects work-piece, machine components and tool materials from rust and corrosion.
• Enables obtain superior finish and accurate tolerances to the parts machined.

MS-Cut-S is recommended for variety of cutting operations on ferrous and non-ferrous metals. The oil is specially suitable for metal working operations where the cooling property is more desirable compared to the lubricating characteristics. MS-Cut-S is normally used in concentration of 5% for mot machining operations. For grinding operations more dilute emulsions are preferred.

MS Cup Grease are smooth structured, pale yellow coloured calcium soap greases. These greases possess good water resistance characteristic and can be used for lubrication of machine elements operating in conditions where water ingress cannot be avoided.

MS Cup Grease are recommended widely for plain bearings operating under moderate to low temperatures (60°C to O°C) Where the churning and vibrations are not excessive. The consistency of these greases allows for application by compression grease cups and hand grease guns. MS Cup Grease are recommended for general purpose lubrication. They are not suitable for high temperature applications and situations demanding grease with extreme pressure characteristics.

• Perform satisfactorily even in wet conditions since they possess superior water resistance quality
• Possess excellent shear stability
• Provide ease of application by manual lubrication equipment, since they have excellent dispensing property

MS HT 51 & HT 52 are non soap base greases. MS HT 51 is brown in colour and MS gem HT 52 is grayish black, due to the addition of chemically stable Molybdenum di-sulphide. The presence of MoS, in MS HT 52 makes it particularly suitable for lubrication of machine elements operating under high temperature conditions. High load bearing properties imparted by MoS2

MS HT 51 grease has been developed for the lubrication of machine elements, plain bearings and anti-friction bearings operating under high temperature conditions (between 120°C to 250°C). MS HT 52 is recommended for calendar roll bearings of textile mills, paper mills and PVC filling machines,hot air exhausters/blowers, high temperature stuffing boxes etc. MS HT 52 is recommended for soot blowers of power plants, slides and other moving parts of overhead cranes for soaking pits in steel mill, track rollers of earth moving equipment, billet feeder bearings in rolling mills and bogie cars in sintering plants,

• Have excellent resistance to oxidation thereby enabling it to withstand sustained exposure to high temperatures
• Ensure minimum softening and loss of structure at high temperatures, even when subjected to substantial shear
• Have excellent resistance to water wash out

MS EP greases are premium quality lithium soap base products containing an extreme pressure additive. These grades are specially formulated to meet the demand of an EP grease for boundary lubrication conditions so as to prevent excessive wear, localised welding or seizure often associated with such severs operating conditions. MS EP greases possess excellent shear stability, high load carrying capacity, high oxidation stability and capability to provide protection against rust and corrosion.

MS EP greases are recommended for the lubrication of both plain and anti-friction bearings in a wide variety of application such as automotive and earth moving equipment, gear associated couplings, electric motors, mining equipment and general industrial machinery.

• Possess excellent dispensing properties at low  and high temperature, ensuring trouble free lubrication with centralise lubrication system
•  Protect machine elements from excessive wear
•  Prevent welding and seizure of the moving parts often caused by shock loading
•  Protect bearing elements against rust and corrosion

MS MP Grease is a premium quality lithium soap, multi-purpose automotive grease, with high drop point, good thermal and structural stability and also having resistance against water wash out. With its smooth structure and high degree of resistance against oxidation and rusting/corrosion it is an ideal product for all grease lubricated parts of automotive equipment.

MS MP Grease is recommended for water pump, wheel bearings, chassis fittings and universal joints, including those of constant velocity type, for mobile equipment e.g., automotive, off- highway equipment such as tractors, construction equipment etc.

• Provides excellent resistance to structural and consistency changes, over wide range of temperatures but remains in place despite severe working or sustained shock impact
• Has excellent low and high temperature properties. It can be dispensed at low
• temperatures and will maintain adequate stay put property at the higher temperatures encountered in service
• Resists effectively, water wash out in use, assuring adequate lubrication over extended service periods
• Provides resistance to oxidation, rust and corrosion.

MS Moly Grease is superior multi-purpose lithium base grease, compounded with finely dispersed molybdenum di-sulphide. The MoS2 being a very effective solid lubricant with extremely good anti-scuffing property gives additional protection to the moving parts even under very severe shock load conditions when the grease components may get squeezed out.

MS Moly Grease is recommended for chassis fittings, wheel bearings, grease cups, grease lubricated universal joints and other lubrication points in passenger cars, trucks, buses, farm tractors, mobile construction equipment as well as other earth-moving machinery. This grease has been found suitable for industrial application where lithium base grease with molybdenum is require

• Resists thinning out even under excessive working in bearings, thereby ensuring minimum leakage and extended service life.
• Resists effectively, water wash out in use.
• Has minimum chemical deterioration over extended periods in storage and service.
• Provides excellent low and high temperature properties.It can be dispensed at low temperatures and maintains adequate stay put property at the higher temperature.
• Provides solid film lubrication, thus reduces friction between sliding surfaces, resulting in optimum service life of the moving parts.

MS WB Grease is a premium quality, sodium soap grease with short fibres and good structural stability. This grease is specially formulated to give long service life to anti-friction bearings of light and heavy vehicles

MS WB Grease is recommended for trouble free lubrication and protection of wheel bearings and various other automotive components which do not get exposed to moisture. MS WB Grease being soda soap grease, is susceptible to water wash out and hence not suitable for water pump bearing lubrication.

• Maintains structural stability in wheel bearing application, even under the most strenuous operation of the automotive vehicles
• Withstands effectively, excessive churning and provides trouble-free long service
• Possesses appropriate pumpability for easy application by grease guns and other manual or power operated dispensing equipment
• Ensures excellent protection to the lubricated parts

MS Grease C is premium quality calcium base grease, specially developed for the lubrication of automotive chassis parts.It possesses strong affinity for metal surfaces with extremely good stay-put properties and adequate water resistance. As a result, the applied lubricant film is not displaced even under repeated shock-loads and vibrations.

MS Grease C has adequate consistency to as an effective heavy duty chassis grease, with high load carrying ability. It is suitable for all chassis parts including suspension and steering system of automobiles. This grease can also be recommended for open and semi enclosed gearing and chain drives of farm equipment.

• Provides excellent resistance to water wash and displacement under shock-loads.
• Ensures protection against wear by preventing metal to metal contact.
• Has equally good dispensing qualities in summer and winter
• Provides protective coating to exposed parts of equipment, during temporary storage.

Supreme quality heavy duty Monograde Engine Oil blended from selected high VI base stocks with a finely balanced additive package. These oils have exceptional thermal & oxidation stability. They have good built-in alkaline reserve to combat corrosive wear that may result from the use of high sulphur fuel. Most suitable for use in Turbo charged and naturally aspirated Diesel engines & high powered Petrol engines based on Petrol, Diesel & Gas.

Superior quality Pump Set Engine Oil specially designed for agricultural pump set diesel engines. Formulated to provide excellent protection and enhanced life to the engine.

• Cleans engine with lesser deposits
• Good Anti-oxidant properties
• Good Anti-wear & Anti-weld properties

Supreme performance heavy duty premium Car Engine Oil, helps extend engine life while providing long drain capability and fuel economy for modern Cars. Scientifically engineered oil formulated from selected HVI Oils and unique Additives combination, which enables this product to provide out-standing performance in high speed Cars in extreme high & low temperature, it has exceptional thermal & oxidation stability, in presence of latest dispersant technology it restricts particulate emission, it out performs all existing grades in terms of superior lubricity, friction modification & long life stability even at high temperature and high speed new generation Cars.

Premium quality heavy duty Multigrade Engine Oil formulated to meet international specifications. A superior additive package provides excellent wear protection, reduces bore polish, lessens engine deposits and oil thickening giving longer oil drain period and better engine life. Most suitable for use in Turbo charged & naturally aspirated Diesel engines and high powered Petrol engines.

Supreme quality heavy duty Multigrade Engine Oil blended from selected high VI base stocks with a finely balanced additive package. This oil has exceptional thermal & oxidation stability, possess high reserve alkalinity to neutralise acidic products. It has lower tendency of oil thickening thereby providing reduced oil consumption. It is most suitable for use in light motor vehicles to heavy commercial vehicles based on Petrol, Diesel & Gas.

These Gear and Lubricating Oils are Moderate duty Automotive Gear and Lubricating Oil blended from high VI base stocks fortified with carefully selected Anti-Oxidant, Anti-Wear, Anti-Rust and Anti-Foam additives. Recommended for use in Auto Axles, Manual Transmission systems and vehicle drives where EP properties are not required.